× Bidding has ended on this item.

Late Model Holzher CNC Router and Edgebander - Pompano Beach, FL (Closed #20286276)

By Order of Secured Creditors! 2017 Holzher "Dynestic 7505" CNC Machining Center, and 2018 Holzher "Streamer 1057 XL" Edgebander

Terms & Conditions
Shipping Information
This Auction Uses Proxy Bidding.
Ended

Holz Her "Streamer 1057XL" Edgebander (2018)

Located in Pompano Beach, FL

  Lot # 002
Listing Image
2020-01-29 10:05:00 PT 2020-01-29 10:05:00 PT America/Denver Holz Her "Streamer 1057XL" Edgebander (2018) Min/Max. 0.4-6 mm Edge Cap;8 -60 mm panel thickness; Min. panel length160 mm. Feed-speed, 10 m/Min (33FPM)single speed. Pre-Milling Station FG-201: (2) 2.0 KW (2.68 HP) - 12,000 RPM motors. Holz-her Glu-Jet GJ 301 CartridgeSystem and flat glue nozzle applicator. Glue heat up time 2 to 3 minutes max. Pressure Section 1912: Servo controlled pressure section with (1) large driven roller and (2) idle rollers. End Trimming Unit 1918: Front rear 2 x 0.35 KW (0.5 HP) - 9,000 RPM motor each, uni-point swivel-axis for no re-indexing when changing from flush to bevel end trim (0 - 10 bevel),PCS programmable pneumatic change-over from flush to bevel. Flush/Bevel/Radius Combination Trimming Unit top bottom unit 2 x 0.65 KW (0.87 HP) - 9,000 RPM each motor. Corner Rounding Unit 1832: (1) Motor 0.22 KW (0.30 HP) - 9000 RPM for up to 3 mm edge thickness and work-piece thickness min./max. 12 - 45 mm (0.473 - 1.772), max. feed speed 10 MPM (33 FMP). Profile Scraping Unit 1929: Top/Bottom servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives, equipped with air-jet blowers and chip collector box. Glue Scraping Unit 1964: Flat, top/bottom, ball bearing guided and pneumatic controlled. Buffing Station 1940: Top bottom buffing motors with 150 mm ( 6.0) cloth buffing wheel diameter, adjusts in any direction (vertical tilt is 0 - 5, horizontal swivel is 0 - 20 1,440 RPM wheel rotation. Unknown
Description

Min/Max. 0.4 - 6 mm Edge Cap; 8 - 60 mm panel thickness;  Min. panel length 160 mm. Feed-speed, 10 m/Min (33 FPM) single speed.

Pre-Milling Station "FG-201": (2) 2.0 KW (2.68 HP) - 12,000 RPM motors.

Holz-her Glu-Jet "GJ 301" Cartridge System and flat glue nozzle applicator. Glue heat up time 2 to 3 minutes max.

Pressure Section "1912": Servo controlled pressure section with (1) large driven roller and (2) idle rollers. 

End Trimming Unit "1918": Front & rear 2 x 0.35 KW (0.5 HP) - 9,000 RPM motor each, uni-point swivel-axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel),"PCS" programmable pneumatic change-over from flush to bevel.

Flush/Bevel/Radius Combination Trimming Unit top & bottom unit 2 x 0.65 KW (0.87 HP) - 9,000 RPM each motor.

Corner Rounding Unit "1832": (1) Motor 0.22 KW (0.30 HP) - 9000 RPM for up to 3 mm edge thickness and work-piece thickness min./max. 12 - 45 mm (0.473 - 1.772"), max. feed speed 10 MPM (33 FMP).

Profile Scraping Unit "1929": Top/Bottom servo motor controlled, programmable knife position for PVC edges, reversible insert carbide knives, equipped with air-jet blowers and chip collector box.

Glue Scraping Unit "1964": Flat, top/bottom, ball bearing guided and pneumatic controlled.

Buffing Station "1940": Top & bottom buffing motors with 150 mm ( 6.0") cloth buffing wheel diameter, adjusts in any direction (vertical tilt is 0° - 5°, horizontal swivel is 0° - 20°); 1,440 RPM wheel rotation.

Additional Information
  • Located 1550 NW 24th Avenue Pompano Beach, FL 33069
  • MAKE Holzher
  • MODEL Streamer 1057 XL
  • SERIAL NUMBER 309/1-803
  • YEAR 2018
  • PHASE 3 PHASE
  • VOLTAGE 230 VOLT
  • FINAL REMOVAL DATE February 7, 2020 Last Day no exceptions
  • ESTIMATED DIMENSIONS 195" x 48" x 60"
  • Shipping Info A non negotionable loading fee has been established - See below. This includes the rigging and loading onto a flat bed trailer. Requests for additional labor, crating or pallatization will be extra.
  • Lot # 002
  • System ID # 20291299
  • End Date
  • Start Date
  • 2106 Page Views
Shipping Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
LOADING FEE $250.00 USD