Bidding has ended on this item.
#LOT015

Homag "BAZ 32/30/K" CNC Machining Center - Contour Edgebander Ended

Complete Manufacturing Facility - Grapevine, TX

  • Winning Bid : $10,000.00 USD Sold
  • 35 Bid(s)
  • High Bidder: j****s
Documents
No documents available
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

Complete Woodworking Plant Auction - Day 1 of 2 - Grapevine, TX ( Closed #53870216 )

Store fixture manufacturer in Dallas-Ft. Worth, TX metro area is closing one of its plants (former PIN plant) and auctioning all assets. Over 100,000 square foot plant minutes from DFW airport loaded with over 1000 lots. Disa 200 HP dust collector, Holzma beam saws, Homag and Weeke CNC machines, Altendorf sliding table saw, Ligmatech case clamps, Koch CNC bore/dowel machine, Ford delivery van, forklifts, pallet racking, air compressors, raw materials, hardware, office furniture and much more! LOTS BEING ADDED DAILY!

  • Item Location

    Grapevine, TX - DFW Airport area

  • Make

    Homag

  • Model

    "BAZ 32/30/K"

  • Serial Number

    0-201-08-3302

  • Year

    1999

  • Phase

    3 PHASE

  • Voltage

    480 VOLT

  • Inspection Date

    See Homepage

  • Final Removal Date

    See Homepage

  • Estimated Dimensions

    24' x 8.5' x 8.5'

  • Estimated Weight

  • Seller Comment

  • Load Fee

    A Rigger is required for this lot. Buyer is responsible for break down & loading.

  • page views

    1656

Homag "BAZ 32/30/K" CNC Machining Center - Contour Edgebander

HOMAG BAZ 32 Routing, Edgebanding & Boring Center with a 96" x 47.2" working field. 

(7) adjustable support rails and vacuum supply system utilize vacuum cups

 HOMATIC NC 83 Controller system with Windows operating system; 4-axis control: X-, Y-, Z- & C-axis; positioning speed of 60 MPM on X- & Y-axis.

Specifications: 

 2.5" (65 mm) max. banding height and 9.1" (232 mm) min. length. 

12 kW (16 HP) Main Spindle (liquid cooled) with "HSK F63" quick change tool holder, spindle programmable from 1,500 - 18,000 RPM; features 0° - 360° C-axis swiveling range. 

12-Position ATC tool holder (max. dia. tooling 120 mm); or (6) tools with 180 mm max. dia. & (6) tools with 70 mm max. diameter. 

Boring head: (17) Vertical spindles with (11) spindles in X-axis, and (7) spindles in Y-axis, driven by a 1.9 kW motor at 4,000 - 7,500 RPM variable speed. 

Machining: (1) Drilling and grooving unit, and (1) Horizontal Router aggregate mounted in tool changer driven by main router motor. 

Gluing unit: 360° Operation for straight edges with hot melt applicator and pressure rollers swiveling via C-axis, 30 mm min. inside radius and 300 mm min. part lenth for radius edgebanding, 0.4 - 3 mm PVC thickness and 0.4 - 2 mm veneer thickness. 

3-Coil magazine for automatic coil material feeding and individual strip feeding device for banding in strip form, 65 mm max. edge height.

Waste conveyor belt under worktable and air conditioner for control cabinet; pressure sensitive safety mats.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

Pick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased.  Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
CONTACT LOCAL RIGGER
$0.00 USD

All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (3% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.  Applicable State & local tax will be added in.