Ask Seller
Biesse "Akron 440" Edgebander 
Ended
Biesse "Akron 440" Edgebander - San Fernando, CA
San Fernando, CA USA
- Winning Bid : $6,300.00 USD Sold
- 105 Bid(s)
- High Bidder: B****f
Biesse "Akron 440" Edgebander - San Fernando, CA ( Closed #60841322 )
Well-known cabinetmaker in the greater Los Angeles, CA area is auctioning a Biesse "Akron 440" edgebander with Pre Mill and Corner Rounding. No longer required for continuing operations.
-
Item Location
11011 Glenoaks Blvd Suite 7 San Fernando, CA 91331
-
Make
Biesse
-
Model
Akron 440
-
Serial Number
16447
-
Year
2011
-
Phase
3 PHASE
-
Voltage
220 VOLT
-
Inspection Date
December 14th, - January 10th,2024 By appointment only
-
Final Removal Date
January 10th - January 17th, 2024 By appointment Only
-
Estimated Dimensions
204" L x 48" W x 72" H
-
Estimated Weight
4,500 Pounds
-
Seller Comment
Seller will disconnect and load onto buyer's flatbed truck/trailer for non-negotiable $200 loading fee. Palletizing, crating or other services may be available at an additional cost.
-
Load Fee
200
-
Lot Notes
-
page views
153
Biesse "Akron 440" Edgebander
Panel thickness, 10 mm - 60 mm
Minimum banding thickness, 0.4 mm
Maximum banding thickness (rolls), 3 mm
Maximum banding thickness (strips), 10 mm - 12 mm, depending on profile
Minimum panel length, 140 mm (5.5")
Minimum panel width, 85 mm (3.3")
Feed speeds, 39 and 59 FPM
10" color touchscreen PC
Windows operating system
Edgebanding infeed table
Infeed fence
Two (2) motor premilling unit
4 HP motors operating at 9,000 RPM
Glue unit with premelt hopper
Pressure unit
One (1) driven roller
Five (5) idle rollers
Two (2) motor end trimming unit
1 HP motors operating at 12,000 RPM
0 - 15 degree tilt
Top/bottom trimming unit
0.9 HP motors operating at 12,000 RPM
Tiltable
Two (2) motor corner rounding unit
0.9 HP motors operating at 12,000 RPM
Top/bottom profile scraping unit with an external collection box
Top/bottom glue scraping unit
Top/bottom buffing unit
0.5 HP motors operating at 2,800 RPM
Hot air blower unit
Motorized pressure beam
Sound enclosure
Outboard roller support
Custom dust manifold
Listed specifications were taken from manufacturer's published information and is assumed to be correct but not guaranteed. Bidder is encouraged to inspect the machine, call with questions or contact the manufacturer for more information.
Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.
Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.
Please log in to view the bid history
LoginIf a load fee is established for an individual lot, that fee will include loading onto a flatbed truck (only) by the seller. Any individual lot without a load fee will be the buyer's responsibility to remove and load (at buyer’s expense).
Payment is due within 24 hours of auction close. Payments must be made via bank wire transfer for any amount above $1,500. Credit cards may be used up to $1,500 (3% processing fee). Please Contact Sabrina Burns with payment questions at 209-839-7707 Any sales tax exemption documents are to be emailed to [email protected] at time of purchase/invoice for tax exemption consideration.